Gambetti ProPlus Tank sizes 400, 600, 700, 900 litres.

 ·         Strong Steel Frame

 ·         Special powder coated paint

 ·         New specially designed tank for even weight distribution

 ·         Total Emptying Tank whatever the angle of the machine

· Clothing locker

· Hand wash tank

· Full 3 section electronic controls with electric pressure adjust

· Balanced Returns

· Neat switch box to mount in a cab or on the dash

· Chemical induction hopper

· Clean water rinse system tank - neatly fits on top of the main tank.  Allows the machine to be rinsed out away from a water source

· AMC 180 (Bravo 180) rate controller - An automatic system that is the most precise on the market.  Keeps the exact amount of litres per hectare applied at all times

· GPS Navigator - A system designed to keep you in an exact straight line without the use of foam or dye.  It uses GPS and plots exactly where you have sprayed.  It colours in the treated areas so you know where has chemical applied and where it has not.  It also plots area via satelite. 

· Foam marker

· Hose reel

· Hydraulic drive pump

· Brackets for Toro, JD, Cushman, Kubota, Jacobsen

· AMC400 - Bravo 400 RCU GPS Controller - A rate controller with built in GPS.  It keep you in a straight line, colours in where has been applied, but more than this, it turn off the booms when passing over an area that has already been treated, and turns them back on when on an untreated area.  It maps area, and whilst doing all this, 100% accurately applies the chemical for you.

· Windfoil Shrouded Booms - this boom can be fitted to all the truck demount sprayers.  Now fitted with tri jets as standard, new alluminium construction and very high quality wheel bearings.  Available as Hydraulic / Electric or Manual Fold

Pro-Plus truck mounted sprayers are very popular with green keepers and football clubs.

This range is fitted with a three cylinder diaphragm pump, which means they run smoother, do not pulse and have the capability to spray large volumes at normal speed, this is a professional sprayer, many manufacturers at the time of writing only fit a two cylinder pump as standard eg Hardi, J. Deere, Toro.

Note the picture looking down on the PRO PLUS this was taken whilst fitted to a Toro Workman see how all the extras ( hose reel, Foam marker kit, Clothing locker, Clean water tank, are all kept neatly within the foot print of the truck. Nothing sticking out to get swiped off or damaged reversing into the shed.

The Pro Plus 900 in the picture is the largest in the range and so has quite a high tank. Anyone wanting a low profile tank should order the long wheelbase Pro Plus 700 which has a 750 litre tank capacity and can be fitted to J. Deere, Toro and Grillo trucks.

The Pro Plus has all the extra's you would expect from a Gambetti sprayer to keep you within the law, hose pipe holder for mains water filling. Correct size of clothing locker , a space in the truck cab is not a clothing locker. (HSE rule). Fully shaped tank to enable spraying all but a few litres out even on slopes, a internal tank washing system with proper stainless steel spinning head. Stainless steel spray-lines fitted with a compact quad jet, standard tips include Billericay three star 04 air bubble jet (red) for ultra low drift, 05 Tee-jet XR for medium capacity high cover (brown), 06. Tee jet XR high capacity high cover (white) and a stainless steel 015 Tee-jet huge volume jet for liquid feed drenching. Fully pressure balanced electric controls are included and are operated from the cab with a neat switch box, computer controls may be fitted as well. Wind up adjustable demounting legs are also standard.

A Chemical mixer induction hopper is optional on the 400, 600, 700 litre sprayers and standard on the 990 litre.
NB> Provided the tank lid height is below 1.3m from the ground NOT A STEP and not more then 300mm from the side of the machine you are not legally obliged to fit a chemical induction hopper. However Gambetti UK strongly advise you to fit one. The CHEM20 chemical induction / mixer hopper has the added advantage of providing a can rinse facility within it, very useful for complying with the water authorities code of practice on container disposal. To make it robust and durable the polyethylene hopper has stainless steel hinges and catches, so rusting and breakage is not a problem and it has a facility to clean its self out with a high pressure rotating head, all the residue is returned to the main spray tank.