Mac Mechanical 3700 & 3000
The MAC  MC Range have mechanical drive with all the traction, reliability and simplicity associated with standard axles.  Better than this, with right size floatation wheels, this machine only requires 8psi ground pressure fully loaded. 4 wheel steer and spray on/off are selected by floor switch for speed and ease when turning.   Cab visibility is good, Air conditioning, carbon filters, C D player, pneumatic seat are all standard.

Bargam MAC 3700 & 3000 MC
The MC also has brake pedal and differential lock. All-round axle suspension is standard.  The MAC3000MC is fitted 177hp 6 cylinder Cummings Iveco engine gives more then enough horse power especially on steep hills and can travel up to 50k.

The MAC MC range has the best of both worlds when it comes to mechanical drive.  The mechanical axles are driven with a conventional differential and mechanical gearbox but to get the plus points of hydrostatic drive.  For example; infinite speed variation without touching engine revs.  No gear changing from forward to reverse very handy in tight corners.  Finger tip joystick control.  All boom functions which consist of independent boom arm geometry, Independent boom section folding and parallel lift arm height

adjustment are also mounted on the joystick.  The SL boom normally fitted to the MAC range was designed for working in Australia where the average spraying speed is around 20k, this is why each boom arm is independently sprung, as well as the whole boom being sprung on the parallelogram lift.
Note the boom main fold rams are in the “closed” position when the boom is open, effectively doubling the strength.

The SL Boom is available up to a width of 30m.
Another boom option is the SFC contractor boom.  Which has the standard main ram operation ie. When the boom ram is in the closed position the boom is also closed.   The SFC can be folded from the cab, to 12, (18 or 20 or 21 these sizes must be pre set) and 24m

Bargam MAC 3700 & 3000 MC TECHNICAL FEATURES

Engine:                                 

Make                      IVECO-AIFO

Type                       F4GE-0684 C                                         

 Power                    129 kW (175 HP)                                  

 Cylinders               6

 Displacement        6.7 1

 Suspension:                       Self-adjusting on front and rear axle.

Transmission:                     Four wheels drive hydrostatic with 2 displacement SAUER-DANFOSS hydraulic motor flanged on a DANA 2 speed gear-box and differential.

Working speed:                   n ˚ - 0+7 e 0+11 km/h (with tyres 270/95R48)

Transfer speed:                   n˚ - 0+26 e 0+38km/h (with tyres 270/95R48)

Service brakes:                   Hydrostatic transmission and pedal brake on front and rear wheels

Emergency & Parking

Brakes:                              (negative) oil disc brakes on front wheels

Differential locking:           On rear wheels

Steering:                            2 wheel, 4 wheel and crab steering.

Turning radius:                  4.30 m (with 2.00m track)

Track:                                 2.00 – 2.25 m

Ground clearance:              0.75 m

Working height:                  0.50 –2.00 m

Weight: 3000 MC               (Depending on spec empty) 6127 - 7500kg (55% front – 45% rear) 

                                                (at full load 48% front – 52% rear)

Tank:                                  3700 Lt or 3000 Lt (in polyethylene)

Clear Water Tank:               250 Lt (in polyethylene)

Hand Washing Tank:           15 Lt

Boom:                                 16 to 24 m with 5 – 7 or 9 sectors

Diaphragm pump:               250 – 280 Lt/min (or 246 Lt/min piston)

Self priming pump              500 Lt/min

Computer:                          For automatic control according to speed and reading of functional parameters

Cab:                                    ROPS accredited with air conditioning and charcoal filter

Ecological mixer:                 For chemical products (30 Lt)

Boom suspension:               On parallelogram with Hydro pneumatic accumulators

                               

OPTIONAL

  • Air assisted kit
  • Stainless steel row marker
  • Air compressor
  • Pre-setable tank filling litre-counter
  • Centralised lubrication system
  • HP piston pump for external washing
  • Digital pressure display for water system
  • Directional Air assisted flow device
  •  B/W Camera
  • Cylinder kit for lifting of the machine