|
The MAC MC Range have mechanical drive with all the traction, reliability and simplicity associated with standard axles. Better than this, with right size floatation wheels, this machine only requires 8psi ground pressure fully loaded. 4 wheel steer and spray on/off are selected by floor switch for speed and ease when turning. Cab visibility is good, Air conditioning, carbon filters, C D player, pneumatic seat are all standard. Bargam MAC
3700 & 3000 MC
The MAC MC range has the
best of both worlds when it comes to mechanical drive. The mechanical axles are
driven with a conventional differential and mechanical gearbox but to get the
plus points of hydrostatic drive. For example; infinite speed variation without
touching engine revs. No gear changing from forward to reverse very handy in
tight corners. Finger tip joystick control. All boom functions which consist
of independent boom arm geometry, Independent boom section folding and parallel
lift arm height adjustment are also mounted on the joystick. The SL boom
normally fitted to the MAC range was designed for working in Australia where the
average spraying speed is around 20k, this is why each boom arm is independently
sprung, as well as the whole boom being sprung on the parallelogram lift.
The SL Boom is available up
to a width of 30m.
The new cab layout on all new machines available from Feb 2009
Optional: High Clear axles (950mm under belly) |
MAC 3000 & 3700MC (The hill climber) With a brake pedal and diff lock. It can stop on steep hills!! Yet still has full hydrostatic speed control and direct shift from forward to reverse. Max speed 50k
Joystick control
for easy selection of forward and reverse, conveniently situated console. Inside the tank everything is stainless steel,
baffles, On the SL and the SCF booms each arm is spring
loaded to
remove all shock being transmitted through the boom (Note yellow
springs) No problem fitting Billericay dribble bars; as booms open and park without fouling on boom rests. |
Bargam MAC 3700 & 3000 MC TECHNICAL FEATURES
Engine:
Make IVECO-AIFO
Type F4GE-0684 C
Power 129 kW (175 HP)
Cylinders 6
Displacement 6.7 1
Suspension: Self-adjusting on front and rear axle.
Transmission: Four wheels drive hydrostatic with 2 displacement SAUER-DANFOSS hydraulic motor flanged on a DANA 2 speed gear-box and differential.
Working speed: n ˚ - 0+7 e 0+11 km/h (with tyres 270/95R48)
Transfer speed: n˚ - 0+26 e 0+38km/h (with tyres 270/95R48)
Service brakes: Hydrostatic transmission and pedal brake on front and rear wheels
Brakes: (negative) oil disc brakes on front wheels
Differential locking: On rear wheels
Steering: 2 wheel, 4 wheel and crab steering.
Turning radius: 4.30 m (with 2.00m track)
Track: 2.00 – 2.25 m
Ground clearance: 0.75 m
Working height: 0.50 –2.00 m
Weight: 3000 MC (Depending on spec empty) 6127 - 7500kg (55% front – 45% rear)
(at full load 48% front – 52% rear)
Tank: 3700 Lt or 3000 Lt (in polyethylene)
Clear Water Tank: 250 Lt (in polyethylene)
Hand Washing Tank: 15 Lt
Boom: 16 to 24 m with 5 – 7 or 9 sectors
Diaphragm pump: 250 – 280 Lt/min (or 246 Lt/min piston)
Self priming pump 500 Lt/min
Computer: For automatic control according to speed and reading of functional parameters
Cab: ROPS accredited with air conditioning and charcoal filter
Ecological mixer: For chemical products (30 Lt)
Boom suspension: On parallelogram with Hydro pneumatic accumulators
![]()
