Bargam UK  

 01361 884288     
Mac 3000

Bargam MAC 3000 LC 

Bargam MAC 2500 & 3000LC has hydrostatic drive with all the traction, reliability and simplicity.  With right size floatation wheels these machines have very low ground pressure even fully loaded. With the 175hp 6cyl engine mounted in front the machine is perfectly balanced – loaded or empty (50%-50%). The centre mounted cab gives much better weight distribution then front mounted cabs.  The engine counter balances the boom, so the weight split over the wheel motors is always an even what-ever the quantity of liquid in the tank. 4 wheel steer and spray on/off are selected by floor switch for speed and ease when turning.   Cab visibility is superb – there is no other machine like it.  Air conditioning, carbon filters, C D player, pneumatic seat are all standard.  A choice of under axle clearance is 1000mm.  On the move. in cab track adjustment or a slightly cheaper manual adjustment is also available. Giving track widths from 1.8m to 2.5m

The suspension is all round hydropneumatic proving a very successful smooth ride.

The maximum forward speed of this machine is 40kph

4 Wheel Steering with 2 and crab steer facility

Turning radius 4.5m

Ground clearance 1000mm (1.2m on request)

Weight 6000kgs

Boom up to 32m

Muller Eco Terminal Rate Controller

We can fit large rolling radius wheels for both row crop and LGP work achieving a very low ground pressure and a much better ability in muddy wet conditions than other UK self propelled machines.

All the MAC Ranges  have finger tip joystick controls.  All SL boom functions which consist of independent boom arm geometry, Independent boom section folding and parallel lift arm height adjustment are also mounted on the joystick.  The SL boom normally fitted to the MAC range was designed for working in Australia where the average spraying speed is around 20k, this is why each boom arm is independently sprung, as well as the whole boom being sprung on the parallelogram lift.
Note the boom main fold rams are in the “closed” position when the boom is open, effectively doubling the strength.

The SL Boom is available up to a width of 32m.
Another boom option is the SFC contractor boom.  Which has the standard main ram operation ie. When the boom ram is in the closed position the boom is also closed.   The SFC can be folded from the cab, to 12, (18 or 20 or 21 these sizes must be pre set) and 24m

OPTIONAL

• Air assisted kit
• Stainless steel row marker
• Air compressor
• Pre-setable tank filling litre-counter
• Centralised lubrication system
• HP piston pump for external washing
• Digital pressure display for water system
• Directional Air assisted flow device
•  B/W Camera
• Cylinder kit for lifting of the machine
• Line purge
• Hyd Hose reel
• Fast fill pump

© 2007 Bargam UK Ltd/Gambettibarre UK Ltd. Bargam Uk Ltd. Send mail to bargaminfo-website@yahoo.com